Millers Oils - CFS 10W60 NT+
Millers Oils - CFS 10W60 NT+ Millers Oils - CFS 10W60 NT+ Millers Oils - CFS 10W60 NT+
$ 25.90

Product Description

Millers Oils' new flagship CFS NT+ range of engine oils completely redefines the performance criteria usually associated with a motorsport oil. The entire CFS NT+ range utilizes a high performance ester formulation combined with a measured addition of NANODRIVE low friction technology providing a further 26% reduction in the coefficient of friction than their predecessors. The result is an instantly appreciable increase in an engine's performance through improved horsepower and torque.

In a nutshell, Millers Oils CFS 10w60 NT+ provides a superior reduction in friction and component wear which results in increased horsepower and torque. Additionally, less friction results in lower engine temperatures which greatly reduces the rate of degradation of the oil. This means you can change your engine oil less frequently.

DESCRIPTION:
Recommended for modern competition engines where maximum power release is required and beneficial for high revving engines, a lower viscosity oil with extremely high anti wear characteristics it is specifically formulated for use in qualifying or shorter duration events. The fully Synthetic Triple Ester Nano Technology Formulation is designed for modern competition engines where maximum power release and ultra low friction are required.

APPLICATION:

Ideal for fast road, competition and race use and also specific for larger race and rally engines, with or without turbochargers. Especially suited to vehicles that are subject to severe high stress conditions and highly beneficial to high revving engines. Suitable for all normally aspirated and turbo-charged engines from two liters upwards.

USER BENEFITS:
Fully synthetic Triple Ester Nano Technology Oil provides:
• Laboratory tests and results show a further 15% reduction in friction and a further 17% reduction in wear over the previous award winning NT range
• Significantly reduced friction
• Reduced component wear promotes longer engine life
• Reduced heat production
• Increased power output and torque
• Improved reliability
• Improved energy efficiency
• Superior anti-friction and anti-wear characteristics
    PERFORMANCE PROFILE:
    • Manufactured to far exceed the requirements of API SM/CF and ACEA A3/B4
    • Ideal for fast road or track day use, especially in engines where a 10w40 is normally specified
    • Suitable for operating at 125oC with peak temperatures up to 150oC

    • Offers exceptional protection, especially where subject to severe and high stress conditions

    TYPICAL CHARACTERISTICS:
    SAE Viscosity Grade 10w60
    Specific Gravity @ 15°C 0.870 
    Kinematic Viscosity @ 100°C 23.3 cSt
    Kinematic Viscosity @ 40°C 161cSt
    Viscosity Index 175 
    Pour Point °C <-42 
    Flashpoint °C >226 
    Cold Crank Viscosity @ -25°
    C 7,000cP Maximum

    TBNmg KOH/gm 10.1

    HEALTH AND SAFETY:

    Health and Safety Data Sheet 7963 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern.

    FOR TECHNICAL ASSISTANCE:
    If in doubt, consult with our partner shop, RPR Automotive at 410-589-3966.

    For more detailed information check out our About Millers Oils Nanotech and FAQs.